mwalbeck/rtl_433
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

README.md: Fix wiki formatting issue

Browse source 
Move from 4 spaces at each line to three back-tick coding with direct
copy-and-pase. Should make it easier to update in the future.
This commit is contained in:
Tommy Vestermark 2015-08-23 16:43:07 +02:00
parent ea486a9490
commit 5bbc84dc58
1 changed files with 58 additions and 56 deletions

114
README.md
View file

@ -31,63 +31,65 @@ Running:
rtl_433 -h
Usage: = Tuner options =
[-d <device index>] (default: 0)
[-g <gain>] (default: 0 for auto)
[-f <frequency>] [-f...] Receive frequency(s) (default: 433920000 Hz)
[-p <ppm_error>] (default: 0)
[-s <sample rate>] Set sample rate (default: 250000 Hz)
[-S] Force sync output (default: async)
= Demodulator options =
[-R <device>] Listen only for the specified remote device (can be used multiple times)
[-l <level>] Change detection level used to determine pulses [0-32767] (default: 8000)
[-z <value>] Override short value in data decoder
[-x <value>] Override long value in data decoder
= Analyze/Debug options =
[-a] Analyze mode. Print a textual description of the signal. Disables decoding
[-A] Pulse Analyzer. Enable pulse analyzis and decode attempt
[-D] Print debug info on event (repeat for more info)
= File I/O options =
[-t] Test signal auto save. Use it together with analyze mode (-a -t). Creates one file per signal
Note: Saves raw I/Q samples (uint8, 2 channel). Preferred mode for generating test files
[-r <filename>] Read data from input file instead of a receiver
[-m <mode>] Data file mode for input / output file (default: 0)
0 = Raw I/Q samples (uint8, 2 channel)
1 = AM demodulated samples (int16)
2 = FM demodulated samples (int16) (experimental)
Note: If output file is specified, input will always be I/Q
[<filename>] Save data stream to output file (a '-' dumps samples to stdout)
´´´
Usage: = Tuner options =
[-d <device index>] (default: 0)
[-g <gain>] (default: 0 for auto)
[-f <frequency>] [-f...] Receive frequency(s) (default: 433920000 Hz)
[-p <ppm_error>] (default: 0)
[-s <sample rate>] Set sample rate (default: 250000 Hz)
[-S] Force sync output (default: async)
= Demodulator options =
[-R <device>] Listen only for the specified remote device (can be used multiple times)
[-l <level>] Change detection level used to determine pulses [0-32767] (default: 8000)
[-z <value>] Override short value in data decoder
[-x <value>] Override long value in data decoder
= Analyze/Debug options =
[-a] Analyze mode. Print a textual description of the signal. Disables decoding
[-A] Pulse Analyzer. Enable pulse analyzis and decode attempt
[-D] Print debug info on event (repeat for more info)
= File I/O options =
[-t] Test signal auto save. Use it together with analyze mode (-a -t). Creates one file per signal
Note: Saves raw I/Q samples (uint8, 2 channel). Preferred mode for generating test files
[-r <filename>] Read data from input file instead of a receiver
[-m <mode>] Data file mode for input / output file (default: 0)
0 = Raw I/Q samples (uint8, 2 channel)
1 = AM demodulated samples (int16)
2 = FM demodulated samples (int16) (experimental)
Note: If output file is specified, input will always be I/Q
[<filename>] Save data stream to output file (a '-' dumps samples to stdout)
Supported devices:
[01] Silvercrest Remote Control
[02] Rubicson Temperature Sensor
[03] Prologue Temperature Sensor
[04] Waveman Switch Transmitter
[05] Steffen Switch Transmitter
[06] ELV EM 1000
[07] ELV WS 2000
[08] LaCrosse TX Temperature / Humidity Sensor
[09] Acurite 5n1 Weather Station
[10] Acurite 896 Rain Gauge
[11] Acurite Temperature and Humidity Sensor
[12] Oregon Scientific Weather Sensor
[13] Mebus 433
[14] Intertechno 433
[15] KlikAanKlikUit Wireless Switch
[16] AlectoV1 Weather Sensor (Alecto WS3500 WS4500 Ventus W155/W044 Oregon)
[17] Cardin S466-TX2
[18] Fine Offset Electronics, WH-2 Sensor
[19] Nexus Temperature & Humidity Sensor
[20] Ambient Weather Temperature Sensor
[21] Calibeur RF-104 Sensor
[22] X10 RF
[23] DSC Security Contact
[24] Brennstuhl RCS 2044
[25] GT-WT-02 Sensor
[26] Danfoss CFR Thermostat
[27] Energy Count 3000 (868.3 MHz)
[28] Valeo Car Key
[29] Chuango Security Technology
Supported devices:
[01] Silvercrest Remote Control
[02] Rubicson Temperature Sensor
[03] Prologue Temperature Sensor
[04] Waveman Switch Transmitter
[05] Steffen Switch Transmitter
[06] ELV EM 1000
[07] ELV WS 2000
[08] LaCrosse TX Temperature / Humidity Sensor
[09] Acurite 5n1 Weather Station
[10] Acurite 896 Rain Gauge
[11] Acurite Temperature and Humidity Sensor
[12] Oregon Scientific Weather Sensor
[13] Mebus 433
[14] Intertechno 433
[15] KlikAanKlikUit Wireless Switch
[16] AlectoV1 Weather Sensor (Alecto WS3500 WS4500 Ventus W155/W044 Oregon)
[17] Cardin S466-TX2
[18] Fine Offset Electronics, WH-2 Sensor
[19] Nexus Temperature & Humidity Sensor
[20] Ambient Weather Temperature Sensor
[21] Calibeur RF-104 Sensor
[22] X10 RF
[23] DSC Security Contact
[24] Brennstuhl RCS 2044
[25] GT-WT-02 Sensor
[26] Danfoss CFR Thermostat
[27] Energy Count 3000 (868.3 MHz)
[28] Valeo Car Key
[29] Chuango Security Technology
´´´
Examples: